PWL PC Wireline Drilling Rod 1.5m 3m 114.3mm / 101.6mm Drill Pipe
Manufactured from Heat Treated High Carbon Alloy Steel featuring
heat treated tool joints for enhanced strength and durability.
Hardened Gauges – and machined Utilizing CNC technology.
1.The drill rod is made of many thread types to meet different
2.Thread compound is a kind of lubricant used to reduce friction in
3.Before drilling, drill rods should be in operation under the
minimum recommended make-up torqueto pressure the box and pin. The
drilling operation torque should be lighter than make-up torque.
4.Rod grease is used to lubricate the drill rod and the hole which
can make a longer tool service life.
5.Drill rods are offered by the bundle.
Standard drill rod here we offer include BQ,NQ,HQ,PQ
BQ rod 1.5m (5fts), BQ rod 3m (10fts),
NQ drill rod 1.5m (5fts), NQ rod 3m (10fts),
HQ rod 1.5m (5fts), HQ rod 3m (10fts),
HWT drill rod 1.5m (5fts), HWT rod 3m (10fts)
Various thread types of drill rods are available. We will meet your
demand for standard, deep, wide-diameter as well as conventional
ROD OD (MM)
ROD ID (MM)
HOLE SIZE (MM)
AWL (THIN KERF)
BWL (THIN KERF)
NQ / NWL
HQ / HWL
|Length||m||1.5 or 3||4.5 or 6||1.5 or 3||1.5 or 3|
|box thread tooth height||mm||0.76||0.76||0.76||1.17|
|pin thread tooth height||mm||0.88||0.88||0.88||1.27|
|thread tooth angle||.||29||29||29||29|
|tensile resistance(A series)||kn||400||530||510||565|
|tensile resistance(B series)||kn||450||615||625||660|